Ultrasonic Cutter
Ultrasonic Cutter SONOFILE
The sharpness of an ultrasonic cutter differs according to various combinations of oscillator, transducer, and blade. Because of abundant experience, our company prepares combinations suitable for various materials. Since we can select the model most suitable for your cutting work, we ask that you confirm the sharpness of the selected model by test cutting first.
Ultrasonic Cutter Products List
To see details of the specifications, please click combination transducers below.
Oscillator
SH-3510
Upgraded: Connection with PLC is now available
Factory improvement through DX/loT requires connection with various controllers and connection with PLC is now available besides the conventional relay control by ON/OFF switching. Standard installation of analog signal output for the load/amplitude and additional digital signals for each oscillation frequency/error type allow outputting more detailed data now.
- Machine / robot-mounted type
- Manual-type hand piece
| Combination transducers | Frequency | Applicable materials | ||
|---|---|---|---|---|
 |
HP-8701-C3 |  |
24kHz |     |
|
HP-2000 |  |
20kHz |   |
|
SF-3110 |  |
20-22kHz | |
|
SF-8500RR |  |
22kHz | |
Oscillator
SF-3441
Upgraded: Connection with PLC is now available
Factory improvement through DX/loT requires connection with various controllers and connection with PLC is now available besides the conventional relay control by ON/OFF switching. Standard installation of analog signal output for the load/amplitude and additional digital signals for each oscillation frequency/error type allow outputting more detailed data now.
- Machine / robot-mounted type
- Manual-type hand piece
Oscillator
SF-653
Our unique power circuit and the use of cooling air have enabled the continuous long-hour use
This is a high-frequency cutter featuring the 40 kHz (40,000 vibrations
per second) vibration frequency of tool with the amplitude of 30 microns.
It maximizes the effect of ultrasonic high-speed micro vibrations. A wide
range of materials, including newly developed composite materials,
rubber and leather, can be cut at will with low processing pressure, sharp
cutting surface and little cutting chips. The power control circuit specially
developed by us and the cooling air inlet suppress the heat generation of
transducer even for large amplitude, thus enabling extended continuous
use. (For a long-time operation without air cooling, contact us.)
- Machine / robot-mounted type
| Combination transducers | Frequency | Applicable materials | ||
|---|---|---|---|---|
|
HP-653 |  |
40kHz |   |
Oscillator
SF-3400 II
High-output cutter for manual operation: Assisting manual operations with clear cutting
This is a high-power ultrasonic cutter featuring the ultrasonic power
output of 220 W. The tool’s ultrasonic vibrations at a frequency of 22 kHz
(22,000 vibrations per second) drastically reduce the cutting resistance.
Varieties of materials can be cut even more rapidly and cleanly with a
lower processing pressure. A function to enable constant monitoring of
loads during cutting was added anew, thereby ensuring added safety and
user friendliness.
- Manual-type hand piece
Oscillator
SF-0102
CE-compliant, versatile manual-type ultrasonic cutter
This is a manual type ultrasonic cutter, which daringly pursued nice Features
user-friendliness. It is provided with a portable handle and storage
rack for use at various jobsites. It is best fitted for a wide range of
applications including carbon prepregs, resins, rubber, and fabrics. For
safety measures, the activation of ultrasonic vibration is reported with
illumination and sound. The product complies with the CE Standard.
- Manual-type hand piece
| Combination transducers | Frequency | Applicable materials | ||
|---|---|---|---|---|
 |
HP-2200 |  |
22kHz |  |