TEL +81-44-877-8311TELPeriod of acceptance
weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)

MENUCLOSE

Circuit board repair

Oscillator:ST-360

This model can be used in combination with Engraving

 

  • Oscillation mode can be selected from 4 modes:Single(  ), intermittent ( – – – or - - - - ) or continuous(—— )
  • Oscillation time of intermittent mode can be adjusted
  • Wide range of line-up : rough scraping by combined tool and micropolishing by clamp tool can be performed
  • Cooling-air equipment is adapted to the handpiece. Continuousoperation is possible by suppressing the heat
  • Engraving as well as circuit board repair, archaeology work arepossible (next page)

Specifications: ST-360

Frequency 20–24kHz Automatic feedback
Maximum output 45W
Amplitude adjustment Continuous variable control
Power supply

Single phase

100 VAC or 200 VAC, 50/60 Hz

Power consumption 150VA
Outer dimensions(mm) 130W×250D×260H
Weight 2.6Kg

Click here to download the catalogs

Click here to apply for a test cut and Inquiries

Apply for a test cutting by phone

TEL +81-44-877-8311

Period of acceptance weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)

Small-sized transducer:HP-9706

Small type of tool can lessen a burden of operators.Well-fitted shape of transducer to hand.24-hour continuous operation is possible by supplying cooling air.

Specifications: HP-9706

Tool screw diameter M6
Cord 1.7m Curly cord
Outer dimensions φ28 × 118L (mm)
Weight 150g
Note Air cooling system

Selective Accessories Tools

  • Multi-purpose Set

    ① SE-8851 ② SE-5845 ③ HR-2020 ④ TF-1000

    ⑤ TR-1000 ⑥ TB-3000 ⑦ MX-4010 ⑧ SC-4561

    ⑨ SC-4261

  • Chisel Engraving Set

    ① HR-2020 ② TB-3000 ③ TR-1000 ④ TF-1000

    ⑤ TG-1060 ⑥ TG-1090

  • Archaeological Set

    ① T89160-X2 ② HB-1004 ③ HR-2020 ④ B-21

    ⑤ B-11 ⑥ B-14 ⑦ B-15 ⑧ B-23

    ⑨ B-10 ⑩ CS-8120-X3 ⑪ CS-1568 ⑫ CS-1168

    ⑬ CS-8168

Standard Accessories

  • フットスイッチ

    Foot switch

Products

PAGETOP