TEL +81-44-877-8311TELPeriod of acceptance
weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)

MENUCLOSE

Ultrasonic Cutter

Ultrasonic Cutter SONOFILE

The sharpness of an ultrasonic cutter differs according to various combinations of oscillator, transducer, and blade. Because of abundant experience, our company prepares combinations suitable for various materials. Since we can select the model most suitable for your cutting work, we ask that you confirm the sharpness of the selected model by test cutting first.

Ultrasonic Cutter Products List

To see details of the specifications, please click combination transducers below.

Oscillator

SH-3510

Upgraded: Connection with PLC is now available

Factory improvement through DX/loT requires connection with various controllers and connection with PLC is now available besides the conventional relay control by ON/OFF switching. Standard installation of analog signal output for the load/amplitude and additional digital signals for each oscillation frequency/error type allow outputting more detailed data now.

  • Machine / robot-mounted type
  • Manual-type hand piece
Combination transducers Frequency Applicable materials
Machine / robot-mounted type HP-8701 HP-8701 24kHz ThermoplasticsCarbon prepregComposite materials Rubber 20t
Machine / robot-mounted type HP-2000 HP-2000 24kHz ThermoplasticsPrepregRubber 15t
Machine / robot-mounted type SF-3110 SF-3110 20kHz ThermoplasticsPrepregRubber 15t
Machine / robot-mounted type SF-8500RR SF-8500RR 22kHz Thermoplastics Composite materialsRubber 15t

Oscillator

SF-3441

Upgraded: Connection with PLC is now available

Factory improvement through DX/loT requires connection with various controllers and connection with PLC is now available besides the conventional relay control by ON/OFF switching. Standard installation of analog signal output for the load/amplitude and additional digital signals for each oscillation frequency/error type allow outputting more detailed data now.

  • Machine / robot-mounted type
  • Manual-type hand piece
Combination transducers Frequency Applicable materials
機械搭載型 SF-3110 SF-3110 20kHz 熱可塑性プラスチックRubber 10t
機械搭載型 SF-8500RR SF-8500RR 22kHz 熱可塑性プラスチックプリプレグ素材 複合素材ゴム10t
機械搭載型 SF-8541RR SF-8541RR 40kHz 発泡材紙・加工紙複合素材

Oscillator

SF-653

Our unique power circuit and the use of cooling air have enabled the continuous long-hour use

This is a high-frequency cutter featuring the 40 kHz (40,000 vibrations

per second) vibration frequency of tool with the amplitude of 30 microns.

It maximizes the effect of ultrasonic high-speed micro vibrations. A wide

range of materials, including newly developed composite materials,

rubber and leather, can be cut at will with low processing pressure, sharp

cutting surface and little cutting chips. The power control circuit specially

developed by us and the cooling air inlet suppress the heat generation of

transducer even for large amplitude, thus enabling extended continuous

use. (For a long-time operation without air cooling, contact us.)

  • Machine / robot-mounted type
Combination transducers Frequency Applicable materials
Machine / robot-mounted type HP-653   40kHz 熱ThermoplasticsPaperRubber 10t

SF-3400 II

Oscillator

SF-3400 II

High-output cutter for manual operation: Assisting manual operations with clear cutting

This is a high-power ultrasonic cutter featuring the ultrasonic power

output of 220 W. The tool’s ultrasonic vibrations at a frequency of 22 kHz

(22,000 vibrations per second) drastically reduce the cutting resistance.

Varieties of materials can be cut even more rapidly and cleanly with a

lower processing pressure. A function to enable constant monitoring of

loads during cutting was added anew, thereby ensuring added safety and

user friendliness.

  • Manual-type hand piece
Combination transducers Frequency Applicable materials
Manual-type hand piece SF-7400   22kHz ThermoplasticsExterior walls
Manual-type hand piece SF-3140   22kHz ThermoplasticsPrepregComposite materialsRubber 10t

Oscillator

SF-0102

CE-compliant, versatile manual-type ultrasonic cutter

This is a manual type ultrasonic cutter, which daringly pursued nice Features

user-friendliness. It is provided with a portable handle and storage

rack for use at various jobsites. It is best fitted for a wide range of

applications including carbon prepregs, resins, rubber, and fabrics. For

safety measures, the activation of ultrasonic vibration is reported with

illumination and sound. The product complies with the CE Standard.

  • Manual-type hand piece
Combination transducers Frequency Applicable materials
Manual-type hand piece HP-2200   22kHz Carbon prepregThermoplasticsCloth FabricRubber 10t

Products

PAGETOP